New Kit: 5687 Stereo Line Stage Amplifier Kit
Product Description
This kit, which cost less than one Teflon coupling capacitor, contains everything needed to populate the stereo board:
— One Aikido 5687-pin stereo PCB (4" by 10")
— Four new tubes (two EH 6CG7s and two NOS JAN 5687s)
— Two 0.47µF, 500V, 10% paper-in-oil coupling capacitors
— Two Auricap 2.2µF 400V coupling capacitors
— Four electrolytic capacitors for heater bypassing
— All the resistors (either 5% 1W carbon-film or 1% 0.5W metal-film), including extra values
— Eight sets of aluminum PCB stand-offs and screws and vibration- insolating rubber O-rings
— Two supporting power-supply capacitors (0.33µF & 0.68µF, 630V, Wima, MKP10 polypropylene-film)
— Four ceramic PCB-mount tube sockets
— One three-position rotary output-capacitor selector switch
— Super strong double sided tape to hold coupling capacitors in place
— 12-Page instruction booklet
— One Aikido 5687-pin stereo PCB (4" by 10")
— Four new tubes (two EH 6CG7s and two NOS JAN 5687s)
— Two 0.47µF, 500V, 10% paper-in-oil coupling capacitors
— Two Auricap 2.2µF 400V coupling capacitors
— Four electrolytic capacitors for heater bypassing
— All the resistors (either 5% 1W carbon-film or 1% 0.5W metal-film), including extra values
— Eight sets of aluminum PCB stand-offs and screws and vibration- insolating rubber O-rings
— Two supporting power-supply capacitors (0.33µF & 0.68µF, 630V, Wima, MKP10 polypropylene-film)
— Four ceramic PCB-mount tube sockets
— One three-position rotary output-capacitor selector switch
— Super strong double sided tape to hold coupling capacitors in place
— 12-Page instruction booklet
